Hanna's LIFT 'N ROLL - Mover
"Think Small!"
Also new, is one of our
hottest selling items.
The Lift 'N Roll
(LNR), is a set of (2) small, hydraulically operated hand
trucks fit on
opposite sides of your cargo. They are held in position by a
built-on ratchet-strap, wrapping around the load and holding it
securely.
The Lift 'N Roll
can be used to move 2 and 3
door coolers, beverage dispensers, or vending machines.
With a floor clearance of 1/8" to 4-1/2", the
Lift 'N Roll allows the operator to squeeze tall
loads under doorjambs and over difficult thresholds. You can
"clam shell" large vending machines, with the
Lift 'N Roll carrying the weight,
instead of the operator. For tight hallways and narrow doors,
you've never had
it so good.
What Is the Lift �N Roll
System?
A Two Unit Set of Small Hand Trucks.
These piano-dolly-type units strap to each side
of your load. They are designed to move 2 and
3 door coolers, soda or food vending machines,
pianos, sensitive electronic equipment,
appliances, safes and almost any other load
that will go through a doorway.
How Will
the Lift �N Roll Make Your Job Better?
Increased Safety� The Lift �N Roll
is designed to take the load off of the operator.
Solves Your Problems� The Lift �N Roll
lifts and
carries a variety of loads, then sets them down
at the delivery point.
How Does the Lift �N Roll
Compare?
Superior Value�The Lift �N Roll is
price competitive and can fit into any budget.
Other similar units are more expensive, too heavy, or poorly
constructed and need to be replaced often.
Exceptional Quality�The Lift �N Roll
is
�Built to Last.�
What Are
the Main Features of the Lift �N Roll?
Smooth Hydraulic Action�Each unit is equipped
with heavy-duty hydraulic rams which raise and
gently lower the load without damage to the floor or product.
Unique Strapping System
Rated to hold 4000 pounds. The straps are positioned
low to keep the load from slipping
off of the toe plate. And, the strap is permanently attached
making it easy to use, and difficult to lose.
Independent Two-Piece
Frame�Each side of the Lift �N
Roll acts independently and has a sliding, two piece
frame. One end of the cargo can be raised while the other is
lowered, giving the operator control over the move.
275-Pound Capacity Casters�The
1000-pound
capacity model is equipped with four casters and the 1500-pound
capacity has six.
Tough Powder Coating�This is the
most durable type of coating available.
High Density Plastic Padding�The
custom
molded padding protects the cargo yet is tough
enough for long life.
Welded Steel Construction�All
components are built to stand up to years of heavy-duty usage.
Everyone Who Uses Them . . .
.
Loves the Lift �N Roll System!
Superior Quality and Exceptional
Affordability in a Lightweight Unit!
Quickly and Easily Moves All
Types of Loads, Including Vending
Machines, Safes and Pianos.
|
What Can You Do
With Lift �N Roll?
Navigate in Tight Spaces�Full
swivel casters allow the load to be maneuvered easily.
�Clamshell�Through Doorways - Some
loads,
such as food vendors, are too large for a
standard door. By strapping the Lift �N Roll
onto the body of the vendor leaving its door
open, it becomes possible to pass the unit
through, door first.
Move Two and Three Door Coolers�They
move
in the same manner as smaller loads, one Lift �N
Roll unit on each end.
Eliminate Bottoming Out�Many
doorjambs have a threshold rise that can cause the load to
�bottom-out�. Raising or lowering one or both sides of the Lift
�N Roll can overcome this.
Slip Under Low Overhead and Doorway
-
Use of the hydraulic rams allows each unit to
be lowered so that there is no more than 1/4� clearance between
the load and the floor.
Adjust for Uneven Entryway�If the
floor is not well aligned with the doorframe, the sliding
two-piece Lift �N Roll frame
allows the operator to easily compensate.
 |
